LISA XL
Fully Automated 6 Plate ELISA Processor
LISA XL
Fully Automated 6 Plate ELISA Processor
Meet the LISA XL
Product Specifications
System
Integrated modular system
Your Benefit:
Independent modules allow every action to be performed independently
Throughput
Capable of performing 576 Wells in a batch
Your Benefit:
High throughput
Dispensing System
Dual Probes
Your Benefit:
Faster dispensing of reagents and faster sample distribution minimizing assay drift
Dispensing System
Disposable pipette tips
Your Benefit:
Avoids sample to sample carry over
Incubation & shaking
Independent plate incubators with shaker
Your Benefit:
6 independent incubators can be operated at different temperatures allows multiple parameters in same batch
Sample & reagent pack
On board flexibility for interchangeble racks for samples and reagents
Your Benefit:
Provides flexibility to user to use racks as per the sample load or number of reagents
Accuracy
Supersweep mode for washing
Your Benefit:
Ensures superior washing with minimalresidual volume
GUI
Easy to touch screen, graphic interface
Your Benefit:
Ensures ease of operation
ELISA
Technical specification
Dimensions
- Length 1375 mm 55"
- Height 845 mm 33"
- Width 850 mm 33.5"
- Weight 195 kgs (Approx)
Power Supply
- Voltage 100 - 240 Volts
- Frequency 50 / 60Hz
- Power consumption 700 W
General Specifications
- Assay per plate Up to 12
- Number of ELISA plates Up to 6
- Sample capacity Up to 272
- Sample / Reagent capacity
- Total 20 racks
- Single rack holds 16 sample / reagent tubes
- Double rack holds 6 x 60 ml reagent bottles (can be used interchangeably)
- Tip / Dilution box
- Total 11 locations of 96 capacity each (can be used interchangeably)
Reader Specifications
- Reading Range 0.0 - 3.5 O.D
- Reading Channels 8
- Filter wheel 8 positions 405 nm, 450 nm, 492 nm, 620 nm std* 578 nm and 700 nm optional + 2 open
- Light source Halogen Lamp
- Reading mode Single, Dual, ORR
- Reading time < 1 min (for single filter)
- Linearity Up to 3.0 O.D (450 nm)
Washer Specifications
- Manifold configuration 16 needles - 8 aspiration & 8 dispensing
- Precision < 5 % at 300 μl
- Wash cycle Programmable
- Residual volume < 5 μl / well
- Soak time Programmable
- Washer buffer capacity 6 × 2.25 L
- Waste water container 1 × 20 L
Incubator Specifications
- Number of incubators Up to 6
- Temperature range RT + 5°C up to 50°C
- Temperature stability ± 1°C
- Incubation time Programmable
- Time to set temperature < 6 min
- Shaking 200 to 800 RPM
- Shaking Method Orbital
Pipetting Specifications
- Number of probes 2
- Tips 300 µl / 1000 µl, Auto / Manual selected
- Multi-dispensing (Reagent)
- Minimum volume 4 μl
- Serum dispensing time < 14 min
- Reagent dispensing time < 5 min
- Sample mixing Yes (Automatic)
- Precision Sample & Reagent
- Sample Dispensing with 300 µl tip:
- 3% above 10 µl
- ± 0.5 µl for 10 µl & less
- Reagent Dispensing with 300 µl tip:
- 3% for 25 µl & above
- Reagent Dispensing with 1ml tip:
- 5% for 75 µl & above"
Process Security
- Liquid level sensing
- Well fill verification
- Clot detection
- Onboard sample identification
- Onboard reagent identification
- Strip verification
- Buffer sensing
- Alarms
Software
- Operating System Windows 10 (Embedded)
- LIS interface Bi-directional, Serial / TCPIP
- USB Port
- Graphic load interface
- Graphical work list
- Data processing Quantitative, Semi-Quantitative & Qualitative
- Multi password access
- Ability to archive data
- Computer (Base configuration considered, higher configuration can be considered for upgrade after testing)
- Intel Core i3, 4 GB RAM, 1 TB hard disk
- Monitor 22" Full HD touch screen
System General
System Type
Discrete, automated, random access, patient prioritized, clinical chemistry analyzer, 1,2, 3 reagent system
Throughput
Upto 1040 tests/hr (800 tests/hr) photometric and 240 tests/hr with ISE (4 Channel)*
Analytical Methods
1-Point, 2-Point, Rate-A, Rate-B, Direct Potentiometry
Barcode Reader
For reagents and samples
Reaction Tray
147 hard glass cuvettes
Reaction Mixing
Stirrer with variable speed
Reading Volume
Reaction volume 150 ul
On-board Laundry
7 stage cleaning, 2 stage drying
Photometer
Multi-wavelength diffraction grating with 15 wavelengths (340, 376, 405, 450, 480, 505, 528, 546, 570, 600, 628, 660, 700, 750 and 800 nm)
Calibration
K-Factor, Linear (1, 2 point & multipoint), 4P and SP Logit-log, cubic spline, exponential, polynomial. On-board serial dilution for calibrator
OD Range
0.0 - 3.0
Light Source
Tungsten halogen lamp
Detector
Silicon photo-diode
Water Consumption
<25 litres /hr
Programmable Parameters:
Default system pack parameters + upto 99 user defined parameters, Unlimited profiles and unlimited calculation items
Quality Control
QC plot data with QC rules. Provision for lab mean. Twin plot
Power Requirement
AC220V± 10%,50 Hz or AC 110 V± 10%, 60 Hz
Power Consumption
2000VA.
Dimensions (mm)
Approx . 1350 (L) x 1000 (D) x 1250 (H)
Weight
Approx . 275 kgs.
Sample Handling
Sample
Serum, Urine, Plasma, CSF, whole blood, other.
Standard / STAT Carousal
44 positions
Sample Rack
Upto 150 samples can be placed simultaneously (excluding standards, calibrators & controls)
Sample Pipetting
2 -60 µl (adjustable in 0.1 µIstep) for Biochemistry, 70 µl (fixed) for ISE Capacitance probe with level sensing, vertical obstruction detection, Clot detection and serum indices
Auto Rerun
Repeat with same, increased or decreased volume (upto 1:150)
Sample Tubes/ Cups
Primary tubes of 5 ml, 7 ml, 10 ml and sample cups
Reagent Handling
Reagent Tray
86 reagent positions with on-board refrigeration
Reagent Pipetting
Two separate probes for Rl, R2 & R3 Rl:60-300 µl (adjustable in 0.5 µl)
R2
0, or 10- 200 µl (adjustable in 0.5 µl)
R3
0, or 10- 200 µl (adjustable in 0.5 µl) Capacitance probe with liquid level sensing & vertical obstruction detection
System Interface
Analyzer - PC
RS - 232 C Serial Port PC - Host
Computer
Bidirectional TCP/IP & RS-232
PC - Printer
USB
Operating system
Windows-based
Database
Unlimited results
